Super B SB12V100E-ZC User Manual (English)

ramirezjefferyAug 3, 2025

What to do if my Super B SB12V100E-ZC battery won't charge?

S
Sharon KellyAug 4, 2025
If your Super B Camera Accessories battery won't charge, several factors could be at play. First, ensure the fuse is installed correctly. If it is, check if the fuse is broken; if so, disconnect all loads and chargers, correct any short circuits or defects, and then replace the fuse. Also, make sure you press the reset button for 5 seconds after installing the fuse or after a fault. If you have batteries connected in series, a defective battery could be the cause, so check and replace any defective batteries. Finally, if the battery has been deeply discharged, disconnect all loads, connect a charger, and press the reset button for at least 5 seconds to resolve the fault condition.

Super B SB12V100E-ZC Specifications

General

Nominal Voltage	12.8 V
Nominal Capacity	100 Ah
Energy	1280 Wh
Cycle life @ 50% DoD	5000 cycles
Float Voltage	13.5 V - 13.8 V
Maximum Continuous Discharge Current	100 A
Peak Discharge Current (≤10 sec)	200 A
Maximum Continuous Charge Current	50 A
Weight	13.5 kg
Terminal	M8
Case Material	ABS
Battery Type	LiFePO4
Terminal Type	M8
Cycle life @ 80% DoD	3500 cycles
Charging Voltage	14.4 V - 14.6 V
Operating Temperature (discharge)	-20°C to +50°C
Operating Temperature (charge)	0°C to 45°C
Storage Temperature	-20°C to 45°C

Summary

Product Specifications and Features

Product Description and Features

Details the battery's LiFePO4 technology, applications, and core features like BMS and CANopen.

Technical Data and Ratings

Specifies mass, dimensions, electrical properties, voltage, current ratings, and ingress protection.

Environmental and Operating Conditions

Outlines safe temperature ranges, humidity, and placement requirements for optimal battery performance.

Safety Guidelines and Precautions

General Battery Safety Precautions

Essential warnings for preventing hazards like fire, explosion, leakage, and electrical shock during handling.

Installation Safety Requirements

Mandatory safety measures for battery installation, including the use of disconnect devices and proper wiring.

Installation and Electrical Connections

Battery Installation Procedure

Covers unpacking, physical placement, securing the battery, and using mounting brackets.

System Wiring and Interfaces

Guides on connecting wires, relays for disconnect, and CANopen interfaces for system integration.

Battery Operation and Monitoring

Charging Procedures and Best Practices

Detailed instructions and warnings for correct charging, charge rates, voltages, and methods to preserve lifespan.

Cell Balancing and State of Charge (SoC)

Explains automatic and manual battery cell balancing and methods for determining the battery's State of Charge.

Battery Monitoring Software

Information on using software to monitor battery properties, status, and logging for performance analysis.

Maintenance, Storage, and Disposal

Inspection, Cleaning, and Maintenance

Procedures for inspecting battery condition, cleaning the exterior, and performing basic maintenance.

Storage and Transportation Guidelines

Recommendations for proper storage, transportation regulations, and safe disposal practices.

Troubleshooting and Warranty

Common Problems and Solutions

Addresses issues like decreased capacity, charging failures, fault conditions, and provides troubleshooting steps.

Warranty and Liability Information

Details the limited warranty period, exclusions, and Super B's liability limitations.

Appendices: Performance and Requirements

Performance Graphs and Data

Visual data showing cycle life vs. depth of discharge, capacity vs. temperature, and load performance.

Conductor and Wiring Specifications

Tables specifying conductor sizes, lengths, and current ratings for safe electrical connections.

Super B SB12V100E-ZC User Manual

Table of Contents

Questions and Answers: