Supermicro SBA-7121M-T1 - Page 7

5
BIOS Setup Manual
X Primary IDE
Master
This displays the status of Auto detection of IDE devices.
Type Select the type. Options include: Auto, CD/DVD and ARMD
LBA/Large Mode Sets LBA Large Mode. Options are DISABLED and Auto.
Block
(Multi-Sector
Transfer)
This sets the data transfer rate from or to the device. Options are Auto (for
multiple sectors) and D
IABLE (for one sector at a time).
PIO Mode This sets the PIO mode. Options are Auto, 0, 1, 2, 3 or 4.
DMA Mode This set the DMA mode. Options are Auto, 0, 1, 2, 3 or 4.
S.M.A.R.T. Sets the S.M.A.R.T. mode. Options are Auto, DISABLE and ENABLE.
32-bit Data
Transfer
Enables or D
ISABLES 32-bit data transfer.
X Serial ATA 0
Primary Channel
While entering BIOS, it auto detects the presence of IDE devices. This displays
the status of auto detection of IDE devices.
LBA/Large Mode Sets LBA Large Mode. Options are D
ISABLED and Auto.
Block
(Multi-Sector
Transfer)
This sets the data transfer rate from or to the device. Options are Auto (for
multiple sectors) and D
IABLE (for one sector at a time).
PIO Mode This sets the PIO mode. Options are Auto, 0, 1, 2, 3 or 4.
DMA Mode This set the DMA mode. Options are Auto, 0, 1, 2, 3 or 4.
S.M.A.R.T. Sets the S.M.A.R.T. mode. Options are Auto, D
ISABLE and ENABLE.
32-bit Data
Transfer
Enables or DISABLES 32-bit data transfer.
X Serial ATA 0
Secondary Channel
While entering BIOS, it auto detects the presence of IDE devices. This displays
the status of auto detection of IDE devices.
LBA/Large Mode Sets LBA Large Mode. Options are DISABLED and Auto.
Block
(Multi-Sector
Transfer)
This sets the data transfer rate from or to the device. Options are Auto (for
multiple sectors) and D
IABLE (for one sector at a time).
PIO Mode This sets the PIO mode. Options are Auto, 0, 1, 2, 3 or 4.
DMA Mode This set the DMA mode. Options are Auto, 0, 1, 2, 3 or 4.
S.M.A.R.T. Sets the S.M.A.R.T. mode. Options are Auto, DISABLE and ENABLE.
32-bit Data
Transfer
Enables or D
ISABLES 32-bit data transfer.
Hard Disk Write
Protect
Disable/Enable device write protection. This will be effective only if device is
accessed through BIOS.
Table 3. SATA Configuration submenu (Continued)
Menu Option Description
All manuals and user guides at all-guides.com