Supermicro X11DPG-QT User Manual

Chapter 4: UEFI BIOS
101
MMCFG Base
Use this feature to select the default value for the PCI MMIO (Memory-Mapped IO) base
address. The options are 1G, 1.5G, 1.75G, 2G, 2.25G, and 3G.
NVMe Firmware Source
Use this feature to select the NVMe rmware to support booting. The options are Vendor
Dened Firmware and AMI Native Support. The default option, Vendor Dened Firmware,
is pre-installed on the drive and may resolve errata or enable innovative functions for the
drive. The other option, AMI Native Support, is o󰀨ered by the BIOS with a generic method.
VGA Priority
Use this feature to select the graphics device to be used as the primary video display for
system boot. The options are Onboard and O󰀨board.
RSC-UMR-8 SLOT1 PCI-E x8 OPROM
RSC-UMR-8 M.2_PCIe OPROM
Select Disabled to deactivate the selected slot, Legacy to activate the slot in legacy mode,
and EFI to activate the slot in EFI mode. The options are Disabled, Legacy, and EFI.
Onboard LAN Option ROM Type
Select an option to enable Option ROM support to boot the computer using a device specied
by the user. The options are Legacy and EFI.
Onboard LAN1 Option ROM
Onboard LAN2 Option ROM
Use the above two features to select the type of device installed in a LAN port specied by
the user for system boot. The default setting for Onboard LAN1 Option ROM is PXE, and the
default setting for Onboard LAN2 Option ROM is Disabled.
Onboard NVMe1 Option ROM
Onboard NVMe2 Option ROM
Onboard NVMe3 Option ROM
Onboard NVMe4 Option ROM
Use the above four features to select the type of the device installed on an NVMe port specied
by the user for system boot. The options are Disabled, Legacy, and EFI.
Onboard Video Option ROM
Select Legacy to boot the system using a legacy video device installed on the motherboard.
The options are Disabled, Legacy, and EFI.

Supermicro X11DPG-QT Specifications

General

PS/2 ports quantity	0
IPMI LAN (RJ-45) port	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	2
Number of SATA III connectors	10
Number of DIMM slots	16
Maximum LRDIMM memory	2000 GB
Supported RDIMM module capacity	64GB
Memory voltage	1.2 V
Supported memory types	DDR4-SDRAM
Supported memory clock speeds	2133, 2400, 2666 MHz
BIOS type	AMI
ACPI version	4.0
BIOS memory size	64 Mbit
RAID levels	0, 1, 5, 10
Wi-Fi	No
LAN controller	Intel® X550
Ethernet interface type	10 Gigabit Ethernet
On-board graphics card model	Aspeed AST2500
Bundled software	Intel Node Manager, IPMI2.0, KVM LAN, NMI, SPM, SSM, SUM, SuperDoctor 5, Watchdog
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 35 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	8 - 90 %
Supported QPI	10.4 GT/s
Processor socket	LGA 3647 (Socket P)
Processor manufacturer	Intel
Processor number of cores supported	28
Component for	Server
Motherboard chipset	Intel® C621
Audio output channels	7.1 channels
PCI Express x16 (Gen 3.x) slots	6

Weight and Dimensions

Depth	335.3 mm
Width	384 mm