Supero X11SAE User Manual

Chapter 4: BIOS
4-37
The following are informational status messages that indicate the current
TPM State:
TPM Enabled Status
TPM Active Status
TPM Owner Status
TXT Support
Intel TXT (Trusted Execution Technology) helps protect against software-
based attacks and ensures protection, condentiality and integrity of data
stored or created on the system. Use this feature to enable or disable
TXT Support. The options are Disabled and Enabled.
iSCSi Configuration
iSCSI Initiator Name
This feature allows the user to enter the unique name of the iSCSI
Initiator in IQN format. Once the name of the iSCSI Initiator is entered
into the system, congure the proper settings for the following items.
Add an Attempt
Delete Attempts
Change Attempt order
Intel(R) I210 Gigabit Network Connection
NIC Conguration
Link Speed
This feature allows the user to specify the port speed used for the
selected boot protocol. The options are Auto Negotiated, 10 Mbps
Half, 10 Mbps Full, 100 Mbps Half, and 100 Mbps Full.
Wake On LAN
Select Enabled for Wake_On_LAN support, which will allow the system
to "wake up" when an onboard device receives an incoming signal.
The options are Disabled and Enabled.

Supero X11SAE Specifications

General

Brand	Supero
Model	X11SAE
Category	Motherboard
Language	English