Superrollo GW70 - 13 Automatic Timer; Brief Description; Configuring an Opening and Closing Time

24
EN
The same switching times every day of the week.
You can set an opening and closing time for your
roller shutter belt winder which will apply to all days
of the week. Once this time is reached, the roller
shutters will open or close automatically.
Changing the switching times
You can change the switching time settings at any time.
Please note that each new setting deletes the previous
setting.
13. Automatic timer; brief description
i
i
In order to set the switching times, you must
carry out this step once at the time that the
roller shutters are to open or close.
For example, carry out the step at 8:00 o’clock
in the morning if you want the roller shutters
to open at 8:00 AM every day.
◆ You must set at least one switching time,
in order to activate the automatic timer.
13.1 Conguring an opening and closing time
i
Congure an opening time ( ▲ )
(e.g. at 8:00 AM)
1. + Simultaneously briey press the
buttons.
2. The automatic LED ashes and the shut-
ter moves to the upper end point.
3. The automatic timer is now activated
and the automatic LED is switched on
continuously..
Your roller shutters will open auto-
matically every day at 8:00 AM.