27
EN
Automatic clearing
After approx. 20 minutes, the roller shutter is automati-
cally raised a small amount to uncover the sensor. If the
sun continues to shine, then the roller shutter remains
in this position. If the brightness decreases below the set
limit, it returns to the upper end point.
i
The above-mentioned delay times can be
exceeded in the event of changing weather
conditions..
14. Automatic solar function; brief description
i
The automatic solar function will be terminated
and must be reactivated if required after the
following events:
◆ After manual actuation.
◆ After execution of an automatic function.
After
20 mins
To Next Page
Loading...