31
EN
16. Removing the superrollo (e.g. in the event of a move)
8. Check the position of the fastening hook and move
the fastening hook into an easily accessible position, if
necessary.
CAUTION!
There is a risk of injury from the turning winding
wheel .
◆ Never reach into the winding wheel compartment
when the motor is running.
◆ Always remove the mains plug before touching
the winding wheel compartment.
9. Finally, remove the mains plug again from the socket.
10. Release the belt from the fastening hook and pull it
out completely from the roller shutter belt winder.
i
To Next Page
Loading...