Connect the Battery Power: Connect the plug-in unit of the motor and car wire
one, then connect the red power wire (remove the plastic cover) with the battery
positive polarity (red wire). (This step is typically completed when the vehicle is
tested prior to being shipped out).
Circuit Diagram:
Fuse: This car has an auto-reset fuse. If the car stops suddenly during
operation, it is likely due to an instantaneous and excessive current, causing
the fuse to trip. If this occurs, simply stop vehicle operation for 30-60
seconds. To avoid the fuse tripping and power being cut off, please keep the
following in mind:
To Next Page
Loading...