2
Thank you for purchasing a W115 winch from Superwinch. It has been
designed and manufactured to provide years of trouble-free operation. We
hope you will be pleased with its performance. If you are not, for any
reason, please contact our Customer Service Department:
(860) 928-7787 USA; (1822) 614101 England.
When requesting information or ordering replacement parts; always give the
following information:
1. Winch Part Number 1401
2. Serial Number (found on housing)
3. Part Number (found in Replacement Parts List section)
4. Part Description
Please read and understand this Owner’s Manual prior to installing and using
your winch. Pay particular attention to the General Safety Information. Your
winch is a very powerful machine. If used unsafely or improperly, there is a
possibility that property damage or personal injury can result. We have
included several features in this winch to minimize this possibility; however,
your safety ultimately depends on your caution when using this product.
Pay particular attention to the caution and warning
notes preceded with the symbols shown here. The notes
contain advice for your protection.
Correct installation of your W115 winch is a requirement for proper
operation. Please Note: This winch is not designed to be used in industrial or
hoisting applications and Superwinch does not warrant it to be suitable for
such use. Superwinch manufactures a separate line of winches for
industrial/commercial use. Please contact our Customer Service Department
for further information.
Note the electrical requirements of the W115 winch you have purchased.:
Part Number 1401 115 Volt 50/60Hz
Congratulations on your choice!
Description Quantity
Winch assembly with wire rope including lead wires 1
Hand saver bar 1
Mounting hardware kit 1
Owner’s manual 1
Risk of electric shock. Do not open. To reduce the risk
of electric shock, do not remove cover. No user
serviceable parts inside. Refer servicing to qualified
service personnel.
INTRODUCTION
This carton contains the following items. Please unpack carefully.
Read instructions before beginning.
UNPACKING
3
PERFORMANCE
Wire Rope Max. Pulling Capacity
Layer lbs. kg
1 1,000 454
2 875 397
3 800 363
4 700 317
5 625 283
6 550 249
SPECIFICATIONS
Motor Current
Load* Speed Amps
lbs. kg ft/min m/min 115V
0 0 23.0 7.0 3.0
250 113 19.0 5.8 5.0
500 227 17.0 5.2 7.0
750 340 15.0 4.6 8.0
1,000 454 13.0 4.0 10.0
Working Load* ...................................1,000 lbs. (454 kg)
Stall Load* ............................................1,500 lbs. (680 kg)
Wire Rope ......................................................... 5/32" x 45'
Voltage ............................................115, 50/60 Hz 1 phase
Motor......................................................... 0.6hp (0.45 KW)
Gear Ratio ....................................................................148:1
Duty Cycle 20 secs ON, 1/2hr. OFF, full load
* Based on first layer performance
To Next Page
Loading...