increased, the output level is automatically
compensated in order to maintain consistent
signal level. This allows the musician to use
the GAIN control to alter the texture of the
modulation effects without an unwanted
increase in audio output level.
The DEPTH control sets the overall intensity
of the tremolo effect.
The SPEED control sets the rate of modulation.
The EXPRESSION jack accepts a 1/4” TRS
cable from a standard expression pedal. This
controls the SPEED of the modulation. The
on-board SPEED control will set the maximum
range of the expression pedal.
Your Supro Tremolo pedal comes equipped
with a 9V battery that is accessible from the
side-mounted battery drawer. A 1/4” TS cable
must be connected to the input jack for the
pedal to power up.
The Supro Tremolo runs on 9V power only.
To Next Page
Loading...