1: Make sure Cube is powered on
* Check whether the LED on knob is on, please charge Cube if not.
2: Check whether the speaker of cell phone is facing to
the MIC of Cube while doing 'chirp'.
3: Try to restart Cube then redo 'chirp' procedure.
4: Please refer to FAQ on www.sugrsugr.com for more
answers.Also you can mail support@sugrsugr.com
to get engineers' professional support.
A: It means Wi-Fi Configuration Failed if Cube voices
"Failed to connect to Wi-Fi”.You can try re-enter
Wi-Fi password and redo “chirp”procedure.
B: You may follow below steps if Cube has no response in
'chirp' procedure.
Wi-Fi Configuration Fail
To Next Page
Loading...