Sutron 8310 - Page 144

Sutron Corporation 8310 & 7310 Users Manual 8800-1125Rev. 2.7 (BETA) 4/16/2014 pg. 144
Nex Tx size
The number of bytes in the next self-timed transmission
Est #Tx bytes/day
Estimated number of bytes per day that will go to
scheduled transmissions, computed based upon the current
message size and transmission schedule
#Tx bytes today
The total number of bytes transmitted today
Alarm status menu:
Last Tx
Time of the last alarm transmission
#Tx today
The total number of alarm transmissions today
#Tx bytes today
The total number of alarm bytes transmitted today
Power status menu:
Status
The current status of the modem (On, Off…)
Last pwr-on
Time of the last power on
Next pwr-on
Time of the next power on
Last pwr-off
Time of the last power off
Next pwr-off
Time of the next power off
LAN status menu:
#Tx bytes today
Total number of bytes transmitted today
#Rx bytes today
Total number of bytes received today
#Tx/Rx errors
Total number of errors that have occurred while
transmitting or receiving.
Total connect time
The total number of days, hours, minutes, and seconds
connected
Send test tx
Press SET/ENTER to send a test transmission
Send SSP mail
Press SET/ENTER to send SSP mail
Last SSP mail rx
A menu showing the last 5 SSP mail messages received
Reset Com Device
Pressing SET will restart communications on the selected device. If the device is a Satlink, it will
also be rebooted. This may be useful if the device was power cycled, temporarily disconnected,
or just appears to have gotten stuck.
Diagnostics/Inputs (n)
Inputs (7)
M1.I1*: AIO1:1 2.49992 V G
M2.I1: AIO1:1 3.8308 V G
M3.I1: AIO1:1 0 mA B
M4.I1: 1 G
M5.I1: SDI: 0M (para -999.9 G