Sutron 8310 - Page 148

Sutron Corporation 8310 & 7310 Users Manual 8800-1125Rev. 2.7 (BETA) 4/16/2014 pg. 148
Send SDI-12 Command
This function allows you to send a command to an SDI-12 device. Use the UP/DOWN arrows to
select a command from the pre-defined list (SDICmds.txt). Use RIGHT to edit the command.
Remember that many commands require you to issue the D0 command to view the data. (See
Diagnostics/SDI Tools for additional information)
Diagnostics/System Status
The Diagnostics/System Status menu provides a way to view the following types of status:
Recent Logged Messages, SW version, communications, basic, I2C, serial number, num resets,
and CPLD version.
The following is a typical display of the System Status menu information. Note that the intended
items are details that you don’t see unless you press the RIGHT arrow.
System Status
Recent Messages >
8310 V1.0.0 >
Communications >
Basic Status >
I2c Statistics >
Serial Number prt004
Num Resets 10
CPLD Version 8320, ver A
End System Status
Recent Messages
This menu item shows recent messages from system.log
8310 Vx.x.x
Vx.x.x is the overall version of the 8310 application. The sub menu item lists all the software
modules and their versions. All modules except kernel, monitor and loader should have the
same version.
Communications
This sub-menu gives status for some of the communications devices:
Communications
LAN: NextSt:11:00:00 LastAlarm:10:33:05 LastST:10:00:00
COM1: NextST:--:--:-- LastAlarm:--:--:-- LastST:--:--:--
RADIO2: NextST:12:10:00 LastAlarm:12:05:40 LastST:12:00:00
SL3: Started
End Communications
The Communications status menu provides information about the various communications
ports in the system.