Sutron 8310 - Page 221

Sutron Corporation 8310 & 7310 Users Manual 8800-1125Rev. 2.7 (BETA) 4/16/2014 pg. 221
5. Use the menus that follow to specify either a transfer via ymodem or ethernet,
and follow the instructions to send the 8310.lod, downloaded in step 1.
6. After the upgrade is complete, reboot the 8310.
Upgrade the Micro Monitor
1. Download the upgrade from the Sutron website
(www.sutron.com/downloads/software.htm). The upgrade typically comes in a
zipped file, and typically has a name similar to “8310_v1.1.4.zip”. Unzip the onto
your PC.
2. Connect to the 8310 using Hyperterminal (or other terminal program supporting
ymodem).
3. Power up the 8310. Press ESC in response to the message “Press ESC now to
Upgrade System”.
4. To upgrade the loader, press “M” to indicate you want to upgrade the micro
monitor
5. Use the menus that follow to specify either a transfer via ymodem or ethernet,
and follow the instructions to send the 8310.mon, downloaded in step 1.
6. When the system prompts, “Ok?”, press “y”
7. After the upgrade is complete, reboot the 8310.