Sutron 8310 - 8310 Device Specifications

Sutron Corporation 8310 & 7310 Users Manual 8800-1125Rev. 2.7 (BETA) 4/16/2014 pg. 223
Specifications
8310
Electrical
Power Required
10-16 VDC (20VDC max) reverse voltage protected
Satlink Units: 10.4 to 15 VDC
Power Consumption
(8310-N or 8310-O)
<3mA standby
<40mA active typical with display off
Mechanical
Enclosure
NEMA-4 Fiberglass
Dimensions
14”x12”x7.5” (36cm x 31cm x 19cm)
Display
2x20 character backlit LCD
Keypad
6 buttons
SD card slot with activity
LED
For download data and read/write setups
Red Warning LED
Indicates setup or operational error
Green Heartbeat LED
Indicates unit is operating properly
Sensor connections
External terminal removable strips
Environmental
Temperature
-40 C to +60 C (LCD operates to -20 C)
Humidity
0-95% Non-condensing
Communications
Interfaces
1 RS232 for user setup
2 RS232 for communications
1 RS232 for serial sensor or other use
True UART with baud rates up to 115,200
Ethernet
Devices supported
(up to 2 Total)
Satlink
GPRS
IRIDIUM SBD
Sutron Telephone Speech/modem
Spread/Spectrum and LOS Radios
Custom devices via BASIC
Protocols
SSP (Sutron Standard Protocol)
Y-MODEM
MODBUS Master/Slave
MODBUS TCP
Custom protocols via BASIC
Features
Simple Front panel setup
Separate schedules for each measurement
Multiple level averaging
Powerful BASIC processor
Autodump data when SD card is inserted