Sutron 8310 - Page 235

Sutron Corporation 8310 & 7310 Users Manual 8800-1125Rev. 2.7 (BETA) 4/16/2014 pg. 235
Command
Description
Access Level
SHUTDOWN
Causes the 8310 app to exit so that it can be
updated.
Setup
SMS cmd
Issue an SMS command (SMS HELP will display list)
This command is only used for GPRS modem
command processing
Setup
STARTUP
Runs 8310.exe from the \Flash Disk folder if it’s
there, otherwise from the \Windows folder. Updates
the AUTOEXEC.BAT if the location has moved.
Setup
STATION [name]
The STATION command will displays station’s name.
If a name is passed to the command, then the station
name will be set and the change will take effect
immediately.
Setup (when
changing
name)
Data (when
viewing name)
STATUS [clear]
Display and or clear com port status
Setup&Data
STOP name
Stops a process forcibly
Setup
TASKS
Displays tasks and heap usage
Setup
TIME [hh:mm:ss]
Displays or sets the time
Setup (when
setting time)
Data (when
viewing time)
TYPE [/C]
Display a to the screen. If the is longer then 24 lines
the display will pause with a “– More – ” prompt
until enter is pressed to continue, or anything else to
abort.
The [/C] option will cause the output to be
continuous (without pause) until the end is reached
or ESC is pressed.
Setup
UI
[/ANSI] [/VT100] [/SMALL]
[/LARGE] [/2] [/SIMPLE]
[/DUMB]
Displays the 25x40 user interface using ANSI
graphics. The graphics mode will be negotiated with
the terminal program to be either ANSI or VT100.
[/ANSI] use ANSI graphics
[/VT100] use VT100 graphics
[/SMALL] a more compact 10x40 display
[/LARGE] a larger 25x30 display
[/2] mimics the 2x20 LCD display
[/SIMPLE] 2x20 with simple graphics for better
compatibility
[/DUMB] 2x20 with no graphics (scrolling text)
Note: on the keyboard ENTER=SET, ESC=OFF/Cancel,
F1=Exit
Setup&Data
UPGRADE
Upgrade the software in the 8310 using Ymodem
Setup
VER
Displays the build date Remote was created
Setup&Data