7
EN
4. Configuring the Recharging Box
4.1 Basic operation
The Recharging Box allows you to manually increase or decrease the credit inside of a key or
a card. Pressing the two blue keys, you can apply two different credit increments, such as 1
and 10 Euros; on the other hand pressing the yellow button you can apply a credit decrease,
such as 1 euro.
4.2 Programming using UNICO software
The Recharging Box can be connected to a PC on which the UNICO software is already
installed, to program the device.
To know how to program the Box using UNICO software, follow the instructions below:
Connect the device to your PC using the micro USB connector
Remove any cashless device inside EuroKey Next system
Open the UNICO software
For more information about UNICO software, please refer to the software’s user manual you
download from the Comesterogroup website at the address:
http://www.comesterogroup.com/dms/Sito Comestero/Download/Manuali/Tools e
Software/Unico_Software_EN.pdf
4.3 How to import cashless system’s configuration parameters
1. Remove any cashless device from the reader and, into the UNICO main screen, press
"Receive” button into the Configuration field placed in the upper right corner, as shown
in Figure 1.
Fig. 4
To Next Page