Technical document –Recharging Box’s User instruction
8
2. Enter the Administrator password and confirm by pressing OK, as shown in the picture
below.
Fig. 5
3. At the end, click on OK.
Fig. 6
Now all the settings of the recharging box are imported within UNICO software.
4.4 setting the Reader
By means of the Reader tab, you can set the charge and credit limits that the Eurokey Next
reader is enabled to set on the keys.
Into the Reader box the default settings are the following three:
- Reloading limit: 50.00
- Max card credit: 100.00
To Next Page