ENGINE 3-89
OIL SUMP FILTER/OIL PRESSURE REGULATOR
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
Refer to the following pages for the details of each step.
Install:
• Oil sump filter
NOTE:
* When installing the oil sump filter, make sure that the arrow
mark
A
points towards the front of the motorcycle.
* Do not loose the O-ring
1
and shim
2
.
• Oil pressure regulator
% Oil pressure regulator: 28 N
.
m (2.8 kgf
.
m, 20.0 lb-ft)
• Oil pan ($3-32)
• Oil cooler hose union bolts ($3-9)
• Exhaust pipe/muffler assembly ($3-9)
Adjust the following item to specification.
* Engine oil ........................................................ $2-9
To Next Page
Loading...
