ENGINE 3-91
OIL COOLER HOSE INSPECTION
Inspect the oil cooler hoses for damage and oil leaks. If any de-
fects are found, replace the oil cooler hose(-s) with a new one.
OIL COOLER INSPECTION AND CLEANING
Remove any foreign matter that is stuck in the oil cooler fins us-
ing compressed air.
Inspect the oil cooler for oil leaks. If any defects are found, re-
place the oil cooler with a new one.
If the fins are bent or dented, repair them by carefully straighten-
ing them with the blade of a small screwdriver.
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
Refer to the following pages for the details of each step.
Install:
• Oil cooler ($3-9)
• Oil pressure switch ($3-37)
To Next Page
Loading...
