ENGINE 3-85
• Turn the oil filter by hand until you feel that the oil filter O-ring
has contacted the oil filter mounting surface. Then, tighten the
oil filter two full turns using the special tool.
) 09915-40610: Oil filter wrench
NOTE:
* Before installing the oil filter, apply a light coat of engine oil
onto its O-ring.
* To properly tighten the oil filter, use the special tool. Never
tighten the oil filter by hand only.
• Install the PAIR valve pipes and hoses and tighten their
mounting nuts to the specified torque.
$
#PAIR valve pipe mounting nut: 10 N·m (1.0 kgf-m)
Replace the gaskets with new ones to prevent exhaust
gas leakage.
To Next Page
Loading...
