Do you have a question about the Suzuki GSX-1300R and is the answer not in the manual?
Guidance for the initial 1600km operation to ensure motorcycle longevity and performance.
Explains the meaning of WARNING, CAUTION, and NOTE for safety information.
Introduction to the owner's manual and the importance of reading it.
Advice on selecting and installing accessories to ensure safe operation.
Details risks associated with modifying the motorcycle, especially the frame.
Recommendations on wearing safety gear, pre-ride checks, and knowing the motorcycle.
Advice on riding in various conditions and adopting defensive riding techniques.
Identifies locations for frame and engine serial numbers for reference.
Diagram and labels for controls and parts on the left handlebar.
Diagram and labels for controls and parts on the right handlebar.
Instructions for using the ignition key and its different positions.
Details the functions of the OFF, ON, LOCK, and P (Parking) positions.
Describes the function of FI, coolant, low fuel, and oil pressure indicator lights.
Explains the tachometer display and left turn signal indicator.
Details the clock, fuel injection system indicator, and speedometer.
Describes right turn signal, coolant temperature, and neutral indicators.
Guides on adjusting and using the clutch lever for engagement/disengagement.
Details operations for headlight dimmer, turn signals, and horn.
Describes the engine stop switch and headlight operation.
Explains the starter button, front brake lever adjustment, and throttle grip.
Instructions for removing and reinstalling the front and rear seats.
Explains how to use helmet holders and associated safety warnings.
Guides on adjusting the front fork spring pre-load for rider preference.
Instructions for adjusting front fork rebound and compression damping.
Covers rear suspension spring pre-load and damping force adjustments.
Specifies fuel requirements, including octane ratings and oxygenated fuel types.
Details the use of gasoline blends containing ethanol or methanol.
Guidelines for maximum engine speed and varying RPM during the break-in period.
Advice on breaking in new tires and riding with them.
Highlights the importance of the first service and performing pre-ride inspections.
Detailed steps for starting the engine when cold, warm, or hard to start.
Information on the supplied tool kit and maintenance for the steering damper.
Instructions for removing and reinstalling the motorcycle's fairing.
Highlights critical points requiring lubrication for optimal performance.
Guidance on battery maintenance, charging rates, and safety precautions.
Instructions for servicing and cleaning the air cleaner element.
Detailed steps for removing and installing the oil filter, including torque specifications.
Instructions for adjusting the engine's idle speed to the specified RPM.
Guides on adjusting the throttle cable play for proper responsiveness.
Details on inspecting clutch fluid level and lever action.
Instructions for checking coolant levels and procedures for changing coolant.
Guidance on inspecting the drive chain for wear, damage, and adjustment.
Procedures for cleaning, oiling, and adjusting the drive chain.
Essential checks for the front and rear brake systems.
Instructions for checking brake fluid levels and reservoir condition.
Guides for adjusting the rear brake pedal position and brake light switch.
Information on proper tire pressure, load limits, and inflation.
Advice on checking tire condition, wear limits, and using correct tire types.
Specific procedures and warnings for repairing tubeless tires.
Procedure to verify the proper operation of the side stand interlock system.
Detailed instructions for removing the front wheel assembly.
Instructions for replacing various light bulbs on the motorcycle.
Specific steps for replacing the headlight bulb.
Guides for adjusting the headlight beam horizontally and vertically.
Instructions for replacing front and rear turn signal light bulbs.
Procedures for changing brake, taillight, and license plate bulbs.
Instructions for accessing the fuse box and identifying fuse functions.
Details the purpose of each fuse in the motorcycle's electrical system.
Guide to diagnose and resolve common engine starting problems.
Identifies potential causes of engine stalling and checks to perform.
Instructions for washing, drying, and caring for the motorcycle's exterior.
Steps for preparing the motorcycle for extended storage periods.
Guidance on storing the battery and tires, and procedures for resuming use.
Lists key specifications for dimensions, engine, and transmission.
Details specifications for chassis, electrical system, and fluid capacities.
| Engine Type | 4-stroke, 4-cylinder, liquid-cooled, DOHC |
|---|---|
| Compression Ratio | 12.5:1 |
| Fuel System | Fuel injection |
| Transmission | 6-speed constant mesh |
| Front Suspension | Inverted telescopic, coil spring, oil damped |
| Rear Suspension | Link type, coil spring, oil damped |
| Front Brakes | Dual hydraulic disc |
| Rear Brakes | Single hydraulic disc |
| Front Tires | 120/70ZR17M/C (58W), tubeless |
| Rear Tires | 190/50ZR17M/C (73W), tubeless |
| Ground Clearance | 125 mm |
| Curb Weight | 266 kg |
| Bore x Stroke | 81.0 mm x 63.0 mm |
| Overall Length | 2140 mm |
| Overall Width | 740 mm |
| Overall Height | 1165 mm |
| Wheelbase | 1485 mm |
| Seat Height | 805 mm |
| Top Speed | 312 km/h (194 mph) |
| Displacement | 1299cc (79.3 cu. in) |
| Power | 197 hp (claimed) |