ELECTRICAL SYSTEM 9-33
FUEL LEVEL GAUGE INSPECTION
• Remove and disassemble the fuel pump assembly.
(5-8)
• Measure the resistance at each fuel level gauge float position.
If the resistance is incorrect, replace the fuel level gauge with
a new one.
09900-25008: Multi-circuit tester set
Tester knob indication: Resistance (Ω)
FUEL LEVEL INDICATOR LIGHT INSPECTION
If the fuel level indicator light does not function properly, check
the fuel level gauge and its lead wire/coupler.
If the fuel level gauge and its lead wire/coupler are functioning
properly, replace the combination meter with a new one.
Float position Resistance
48.4 mm (1.91 in) 179 – 185 Ω
196.4 mm (6.67 in) 3 – 5 Ω
196.4 mm
(6.67 in)
48.4 mm
(1.91 in)
SAMPLE
To Next Page
Loading...
