3-4
Check the condition of the ATV to
help make sure that you do not have
mechanical problems, or you might
get stranded somewhere when you
ride. Before riding the ATV, be sure to
check the following items. Be sure
your vehicle is in good condition for
the personal safety of the rider and
protection of the vehicle.
WARNING
Overloading this ATV or carrying
or towing cargo improperly can be
hazardous.
Overloading or improper towing
could cause changes in vehicle
handling which could lead to an
accident.
Never exceed the stated load
capacity for this ATV. Refer to the
ACCESSORY USE AND VEHICLE
LOADING section in this manual.
WARNING
Checking maintenance items
when the engine is running can be
hazardous.
You could be severely injured if
your hands or clothing gets
caught in moving engine parts.
Shut the engine off when perform-
ing maintenance checks, except
when checking the light, engine
stop switch, and throttle.
WHAT TO
CHECK
CHECK FOR:
Steering 1. Smoothness
2. No restriction of
movement
3. No play or looseness
Brakes 1. Fluid level in the reservoir
to be above “LOWER” line
2. No fluid leakage or
damage
3. Proper pedal and lever
play
4. No “sponginess”
Tire 1. Proper pressure
2. Enough tread depth
3. No cracks, rips or other
damage
Fuel 1. Enough fuel for the
intended run
2. Fuel hose connected
securely
3. No damage to fuel tank or
cap
4. Tank cap closed securely
Lighting Proper operation of all
lights – Headlight,
Brake/Taillight
Engine stop
switch
Proper operation
Horn Correct function
Engine oil Correct level
Gear oil Correct level
Cooling
system
1. Proper coolant level
2. No leaks or damage
Throttle 1. Proper cable play
2. Smooth response
3. Quick return to idle
position
Shift lever 1. No damage
2. Smooth operation
General
condition
1. Bolts and nuts are tight
2. No rattle from any parts of
the machine with the
engine running
3. No visible evidence of
damage
To Next Page
Loading...
