Suzuki LT-A750X/P - Repair Instructions; Front Output Shaft Components; Front Output Shaft Removal and Installation; Propeller Shafts

Propeller Shafts: 3D-1
Driveline / Axle
Propeller Shafts
Repair Instructions
Front Output Shaft Components
B831G23406001
Front Output Shaft Removal and Installation
B831G23406002
Removal
1) Remove the engine assembly from the frame. Refer
to “Engine Assembly Removal in Section 1D
(Page 1D-13)”.
2) Disassemble the engine top side. Refer to “Engine
Top Side Disassembly in Section 1D (Page 1D-17)”.
3) Separate the crankcase with the special tool. Refer
to “Engine Bottom Side Disassembly in Section 1D
(Page 1D-45)”.
Special tool
(A): 09920–13120 (Crankcase separating
tool)
1
2
3
5
6
7
4
FWD
FWD
I831G1340001-03
1. Front output shaft bearing (Rear) 7. Front drive collar assembly
2. Front output shaft : Apply grease.
3. Front output shaft housing : Apply water resistance grease.
4. Front output shaft bearing (Front) : Apply engine oil.
5. Shim(s) : Do not reuse.
6. Oil seal
(A)
I831G1340002-03