Maintenance and Lubrication: 0B-19
Front Brake Hose Replacement
Replace brake hose
Every 4 years
Refer to “Front Brake Hose Removal and Installation in
Section 4A (Page 4A-7)”.
Rear Brake Pedal / Rear Brake (Parking Brake)
Lever Inspection and Adjustment
B931G20206019
NOTE
Adjust the rear brake by adjusting the brake
pedal first and then adjust the brake lever.
Brake Pedal Height
1) Inspect the brake pedal height “a” between the pedal
top face and footrest. Adjust the brake pedal height if
necessary.
Brake pedal height “a”
12.5 – 22.5 mm (0.5 – 0.9 in)
2) Loosen the lock-nut (1).
3) Turn the adjuster (2) until the brake pedal becomes
12.5 – 22.5 mm (0.5 – 0.9 in) “a” higher from the top
of the footrest.
4) Tighten the lock-nut (1) securely.
Brake Pedal Free Travel
Inspection
Inspect and adjust the rear brake pedal free travel “a” as
follows.
Rear brake pedal free travel “a”
20 – 30 mm (0.8 – 1.2 in)
Adjustment
• Turn the adjuster nut (1) so the rear brake pedal has
20 – 30 mm (0.8 – 1.2 in) free travel at the rear brake
pedal end before pressure is felt.
• Adjust the rear brake light switch so that the brake
light will come on just before pressure is felt when the
brake pedal is depressed.
“a”
I831G1020051-02
1
2
I831G1020052-02
“a”
I831G1020053-02
1
I831G1020054-01
I831G1020090-01
To Next Page
Loading...
