Suzuki LT-A750X/P - EPS Control Unit Construction; EPS Control Unit Removal and Installation

Power Assisted Steering System: 6C-48
Repair Instructions
EPS Control Unit Construction (LT-A750XP/ZK9)
B931G46306001
EPS Control Unit Removal and Installation (LT-
A750XP/ZK9)
B931G46306002
Removal
1) Disconnect the battery (–) lead wire. Refer to
“Battery Removal and Installation (LT-A750XP/ZK9)
in Section 1J (Page 1J-2)”.
2) Remove the front fender. Refer to “Front Side
Exterior Parts Removal and Installation in Section
9D in related manual”.
3) Disconnect the EPS control unit couplers.
1
2
3
3
“B”
4
“A”
(a)
FWD
FWD
I931H1630056-02
1. EPS control unit 4. Torque sensor coupler
2. EPS control unit plate : 12 Nm (1.2 kgf-m, 8.5 lbf-ft)
3. Cushion “B”: Install the clip of the torque sensor coupler to the hole “A” of the
EPS control unit plate.
I931G3630041-01