SPECIFICATIONS
DIMENSIONS AND CURB MASS
Overall length ..................................................2060 mm (81.1 in)
Overall width....................................................1145 mm (45.1 in)
Overall height ..................................................1220 mm (48.0 in)
Wheelbase ......................................................1270 mm (50.0 in)
Ground clearance............................................ 250 mm (9.8 in)
Front track ....................................................... 880 mm (34.6 in)
Rear track........................................................ 900 mm (35.4 in)
Seat height ...................................................... 840 mm (33.1 in)
Curb mass....................................................... 263 kg (579 lbs) ... LT-F400
279 kg (615 lbs) ... LT-F400F
ENGINE
Type.................................................................Four-stroke, air-cooled with SACS, OHC
Number of cylinders ........................................1
Bore.................................................................82.0 mm (3.228 in)
Stroke..............................................................71.2 mm (2.803 in)
Displacement...................................................376 cm
3
(22.9 cu. in)
Compression ratio ...........................................9.0 : 1
Carburetor .......................................................KEIHIN CVK32, single
Air cleaner .......................................................Polyurethane foam element
Starter system.................................................Electric and recoil starter
Lubrication system ..........................................Wet sump
DRIVE TRAIN
Clutch ..............................................................Wet multi-plate, automatic, centrifugal type
Transmission ...................................................5-speed forward constant mesh
Transfer............................................................2-speed forward with reverse
Gearshift pattern .............................................All up, foot lever operated
Primary reduction ratio....................................2.392 (67/28)
Secondary reduction .......................................1.133 (17/15)
Final reduction ratio (Front and Rear) .............3.600 (36/10)
Transfer reduction ratios, Low .........................2.435 (35/13 × 19/21)
High ........................1.296 (35/27)
Transmission gear ratios, Low.........................3.083 (37/12)
2nd .........................1.933 (29/15)
3rd ..........................1.388 (25/18)
4th ..........................1.095 (23/21)
Top..........................0.913 (21/23)
Reverse ..................2.833 (34/12)
Drive system....................................................Shaft drive
To Next Page
Loading...
