3-68 ENGINE
Install the clutch shoes.
Install the washer as its convex side faces outside.
Before installing the clutch shoe nut, apply engine oil to the
thread and inside surface of the nut.
While holding the generator rotor with the special tool, tighten
the clutch shoe nut to the specified torque.
& 09930-44520: Generator rotor holder
'
" Clutch shoe nut: 140 N•m (14.0 kgf-m, 101.5 lb-ft)
Install the clutch release arm
1 and washer
2 clutch release
ball inner guide
3 and release ball assembly
4.
CLUTCH COVER
Install the dowel pins and new gasket.
Install the clutch cover.
INSIDE
Washer
OUTSIDE
The clutch shoe nut has left-hand threads.
PartShark.com
877-999-5686
To Next Page
Loading...
