Suzuki SE200 Series User Manual

From machine serial No. 11723 ~

SUZUKI MACHINERY CO., LTD.
● Maintenance or repair works must be done by trained technicians only.
● Replacement spare parts should be approved by manufacture.
● Any conversion for the machine is prohibited.

Suzuki SE200 Series Specifications

General

Brand	Suzuki
Model	SE200 Series
Category	Industrial Equipment
Language	English

Summary

Safety Instructions

Adjustment Procedures

Important Points for Adjustment

Key positions for machine assembly and initial setup.

Brake Pressure Adjustment

Adjusting brake pressure for proper machine operation.

Looper Stroke and Timing

Setting the correct stroke and timing for loopers.

Needle Bar Height Adjustment

Adjusting the needle bar height relative to the looper.

Needle Guard, Loopers, and Spreaders Position

Positioning needle guard, loopers, and spreaders correctly.

Position of Reducing Stitch Rod

Adjusting the stitch rod for stitch density control.

Throat and Needle Plate Height

Setting the correct height of the throat and needle plate.

Needle Thread Tension Release

Adjusting the needle thread tension release mechanism.

Looper Gyration Base Zero Position

Setting the zero position for the looper gyration base.

Position of Cloth Feed Table

Adjusting the position of the cloth feed table.

Length Compensation of Buttonhole Line

Adjusting buttonhole length for equal stitch points.

Upper Cloth Clamp Height and Pressure

Adjusting height and pressure of the upper cloth clamp.

Spreading Cloth Clamp Plate Adjustment

Adjusting the spreading cloth clamp plate.

Knife Pressure Adjustment

Adjusting the pressure of the knife mechanism.

Sensor Position Settings

Sensor for Cloth Clamp Lock/Unlock

Adjusting sensors for cloth clamp lock and unlock functions.

Sensor for Needle Bar Highest Stop Position

Adjusting the sensor for the needle bar's highest stop position.

Sensor for Knife Cam Stop and Start

Adjusting sensors for knife cam stop and start positions.

Sensor for Main Cam Stop Position

Adjusting the sensor for the main cam stop position.

Sensor for Stitch Start and Stop

Adjusting sensors for stitch start and stop operations.

Control Box Identification

220/230V CE Marking Control Box

Identifies control box for 220/230V CE marked machines.

220/230V Non-CE Marking Control Box

Identifies control box for 220/230V non-CE machines.

100/120V Control Box

Identifies control box for 100/120V machines.

LED Lamp Indication for Error Check

Trouble Shooting Guide

Cloth Clamp Issues

Troubleshooting cloth clamp not locking/lowering.

Machine Start Issues (Table)

Troubleshooting table not starting or machine not starting.

Machine Start Issues (General)

Troubleshooting general machine start problems.

Needle Bar or Knife Arm Malfunction

Troubleshooting needle bar or knife arm not working.

Needle Bar Stop Issues

Troubleshooting needle bar not stopping correctly.

Cloth Feed Table Stop Issues

Troubleshooting cloth feed table not stopping.

Stitch Action or Table Start Issues

Troubleshooting stitch action or table start problems.

Cloth Clamp Motor Operation

Troubleshooting cloth clamp motor not starting or stopping.

Knife Operation Issues

Troubleshooting knife not starting or stopping.

Needle Bar Operation Issues

Troubleshooting needle bar not working.

Power Supply Issues

Troubleshooting power or electricity supply problems.

Knife Stop Position Incorrect

Correcting incorrect knife stop position.

Needle Bar Stop Position Incorrect

Correcting incorrect needle bar stop position.

Stitch Point Misalignment

Troubleshooting stitch point alignment issues.

Knife Broken Frequently

Diagnosing and fixing frequent knife breakage.

Stitch Length/Pitch Adjustment

Troubleshooting stitch length or pitch adjustment.

Skip Stitch or Thread Breakage

Addressing skip stitches or thread breakage.

Needle, Looper, Spreader Breakage

Troubleshooting breakage of needles, loopers, or spreaders.