2-57
Make the settings according to the proce-
dure below. If the ignition switch is turned off
while making settings, the mode selected at
the time of turning the ignition switch off is
retained.
1. Display the Ride View.
2. Press the MODE switch 1 to select
“SDMS”. The selected item is high-
lighted.
3. Press the SELECT switch 2 / to
select a mode.
NOTE:
• The mode can be changed when the
throttle is not wide open.
• If the mode cannot be switched, the indi-
cator blinks when the SELECT switch 2
is pressed.
4. If the MODE switch 1 is pressed, the
settings are confirmed and the high-
lighted display is canceled.
To Next Page
Loading...
