7-47
4. Reinstall the drain plug and tighten it
securely after all the oil has been
drained out. Hold the motorcycle
vertically and pour fresh oil through
the filler hole until the oil level
reaches the oil filler hole. Approxi-
mately 200 – 220 ml (6.8 – 7.4 US
oz) of oil will be required.
5. Reinstall the oil filler cap.
NOTE: Recycle or properly dispose of
used oil.
WARNING
Operating the motorcycle with too lit-
tle final gear oil can cause the final
drive unit to lock up and cause an
accident.
Check for leaks and the correct level
of final gear oil before each use. Add
oil if necessary. Tighten the drain
plug securely after changing the gear
oil.
WARNING
Children and pets may be harmed by
swallowing new or used oil. Repeated,
prolonged contact with used engine oil
may cause skin cancer. Brief contact
with oil may irritate skin.
Keep new and used oil and used oil fil-
ters away from children and pets. To
minimize your exposure to used oil,
wear a long-sleeve shirt and moisture-
proof gloves (such as dishwashing
gloves) when changing oil. If oil con-
tacts your skin, wash thoroughly with
soap and water. Launder any clothing
or rags if wet with oil. Recycle or prop-
erly dispose of used oil and filters.
To Next Page
Loading...
