To Next PageTo Next Page
Need help?Do you have a question about the SV Sound PB12-NSD and is the answer not in the manual?
General| Type | Subwoofer |
|---|---|
| Subwoofer Type | Powered |
| Driver Size | 12 inches |
| Amplifier Power | 400 watts RMS |
| Enclosure Type | Bass Reflex |
| Phase Control | 0-180 degrees |
| Frequency Response | 18 Hz - 150 Hz ±3 dB |
| Inputs | RCA Line Level |
| Low Pass Filter | 50-150 Hz, continuously variable |
Focus on high-quality parts and cost-effective pricing for performance.
Describes the rigid, compact, and durable cabinet design of SVS subwoofers.
Highlights flared port fittings for low-noise, distortion-free bass reproduction.
Discusses the attractive enclosure and components, emphasizing size matters for bass.
Details the high-quality, efficient North American-built amplifiers used in SVS subwoofers.
Instructions for carefully unpacking the subwoofer and saving materials for potential returns.
Guidance on optimal placement, recommending corners for the best bass response.
Explains how to connect the subwoofer to a receiver using RCA cables.
Emphasizes the criticality of proper channel balance and receiver setup for optimal sound.
Steps to prepare for calibration, including setting receiver volume and subwoofer gain.
How to use gain controls with receiver settings for desired bass calibration.
Explains the function of the phase control for synchronizing bass waves from multiple sources.
Details using RCA jacks for input and output for connecting to audio systems.
Describes the automatic power-on feature that activates the sub when a signal is detected.
Instructions on enabling or disabling the crossover for different system configurations.
Mentions binding posts for connecting systems without low-level outputs.
Instructions for using the main power switch to completely cut power to the amplifier.
Advises using dedicated outlets, not convenience outlets on receivers, for power connection.
Information on user-replaceable fuses and their location.
