EN -75-
PART - 5.
TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION
PART - 6. BEFORE CALLING YOUR AFTER SALES SERVICE
Check Warnings;
Your fridge warns you if the temperatures for cooler and freezer are in improper levels or
when a problem occurs in the appliance. Warning codes are displayed in the Freezer and
Cooler Indicators.
• The original packaging and foam may be kept for re-transportation (optionally).
• You should fasten your fridge with thick packaging, bands or strong cords and follow the
instructions for transportation on the package for re-transportation.
• Remove movable parts (shelves, accessories,
vegetable bins etc.) or x them into the fridge
against shocks using bands during re-positioning
and transportation.
Always carry your fridge in the upright position.
Repositioning the door
• It is not possible to change the opening direction of your fridge door, if the door handles
on your fridge are installed from the front surface of the door.
• It is possible to change the opening direction of the door on models without any handles.
• If the door opening direction of your fridge can be changed, you should contact the
nearest Authorised Service to have the opening direction changed.
ERROR TYPE MEANING WHY WHAT TO DO
SR
"Failure
Warning"
There is/are some
part(s) Out of order
or there is a failure in
cooling process
Call Service for
assistance as soon as
possible.
SR – Set value
blink on freezer
set value
screen
Freezer comp.
Not Cold enough
This caution will be
seen especially after
long term of power
failure
1. Do not freeze the foods
that are thaw and use in
short time period.
2. Set the freezer
temperature to colder
values or set the
super freeze , until the
compartment gets to
normal temperature.
3. Do not put fresh food
until this failure is off.
To Next Page
Loading...
