10
Electrical Safety
1. Have an authorized electrician set grounding
equipment. Our company shall not be responsible for the
damages that shall be incurred due to using the product
without grounding according to local regulations.
2. The circuit breaker switches of the oven shall be
placed so that end user can reach them when the oven
is installed.
3. The power supply cord shall not contact the hot
parts of the appliance.
4. If the power supply cord is damaged, this cord shall
be replaced by the manufacturer or its service agent or
an equally qualied personnel to prevent a hazardous
situation.
5. Never wash the product by spraying or pouring
water on it! There is a risk of electrocution.
6. WARNING: To avoid electric shock, ensure that the
device circuit is open before changing the lamp.
7. WARNING: Cut off all supply circuit connections before
accessing the terminals.
8. WARNING: If the surface is cracked, turn off the appliance
to avoid risk of electric shock.
9. Do not use cut or damaged cords or extension cords
other than the original cord.
GB
To Next Page
Loading...
