SWASTIK TBC-961 - User Manual

ENT
RST
TBC-961USERMANUAL PROGRAMMABLECOUNTER
Specifications:
Displays:
FRONTKEYS:
ADJUSTMENTOFSTATION:
ADJUSTMENTOFROTARY:
PROCEDURE:
FUNCTION DISPLAY
STATION
ROTARY
1or2
0to99
Stn
Stn
Rotr
Rotr
RANGE
(A)Display1: Upper8-DigitDisplayinREDcolourindicates TOTAL COUNT.
Lower4-DigitDisplayinGREENcolourindicatesRPM.(9999)& TabletRate.(B)Display1:
1.MicroControlellrBased,DoubleDisplay.
2.Dimentions:Size:96X96X65mm.
Panelcutout:92X92mm.
3.Supply:230V AC+10%,50Hz.
4.Sensor:NPN/PNP ProximitySwitchSelectable.
5.IndicatetotalcountRATEandRPM
1.Presskeyfor2secondsforchangesvalueofStation.
Display-1willindicatethecurrentvalueofSTATION.
Display-2willshow
Youcanchangescurrentvalueofsetpointbypress
1.Presskeyfor4secondsforchangesvalueofStation.
Display-1willindicatethecurrentvalueofSTATION.
Display-2willshow
Youcanchangescurrentvalueofsetpointbypress&keys.
-
TheseFrontkeysareusedforseeandchangescurrentvaluesofSET COUNT,STATIONand
ROTARY.Whenupkeypressdisplaywillshowcountperminute.
ENT
RST
SET
SET
SET
The8Digitshowsthetotalcountoftablet
.(1)SHIFT Digitkeyand(2)UP key
.ByusingSHIFT Digitkey4,youcanselectthedigittobechanged.
. A blinkingdotindicatestheselecteddigit.
.ByusingUP key,youcanincreasethevalueofselecteddigit.
.Shiftthedottoadigityouwanttochange,bykey.
.Increasethevalueofselecteddigitbykey.
. ThiswayyoucanchangethestationNO.&No.OFRotary.
.Presstostoresetvalueinmemory,simultaneouslycountergoesincontrolmode.
TBC-961
SET
ENT
RES ET
TOTAL COUNT
RPM
99999999
9999

SWASTIK TBC-961 Specifications