EasyManua.ls Logo

Swatch ETA 2671 User Manual

Swatch ETA 2671
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
COMMUNICATION TECHNIQUE
TECHNISCHE MITTEILUNG
TECHNICAL COMMUNICATION
ETA SA Manufacture Horlogère Suisse
SC Product Communication | Bahnhofstrasse 9 | 2540 Grenchen | Switzerland
Phone +41 (0)32 655 71 11 | Fax +41 (0)32 655 71 74 | contact@eta.ch | www.eta.ch
7 ¾´´´ ETA 2671
CT 2671 FDE 485604 10 24.08.2015
7 ¾´´´ Ø 17,20 mm
Hauteur sur mouvement Höhe auf Werk Movement height 4,80 mm
Réserve de marche Gangreserve Running time 38 h
Nombre de rubis Anzahl Rubine Number of jewels 25
Angle de levée du balancier Hebungswinkel der Unruh Angle lift of balance 51°
Fréquence Frequenz Frequency 28’800 A/h
Les travaux de réparation et de révision ne doivent être effectués que par du personnel dûment formé.
Reparatur- und Revisionsarbeiten dürfen nur von ausgebildetem Fachpersonal ausgeführt werden.
The repair and reconditioning work must only be performed by properly trained personnel.
1 2 3
Question and Answer IconNeed help?

Do you have a question about the Swatch ETA 2671 and is the answer not in the manual?

Swatch ETA 2671 Specifications

General IconGeneral
Movement TypeAutomatic
CaliberETA 2671
Jewels25
Power Reserve38 hours
Diameter17.2 mm
Height4.8 mm
Frequency28800 A/h
FunctionsHours, minutes, seconds

Summary

General Information and Safety

Before Starting Work

Study technical communication carefully before starting operations.

Eye Protection Requirement

Mandatory eye protection for all interventions and work on the movement.

Environmental Protection Requirements

Adhere to legal provisions for waste handling and disposal of parts.

List of Components

Handsetting Mechanism Assembly Details

Assembling the Handsetting Mechanism

Step-by-step assembly of the handsetting mechanism parts.

Lubrication for Handsetting Mechanism

Specifies oils/greases for handsetting mechanism assembly.

Winding Stem and Spring Click Operations

Removing the Winding Stem

Procedure for removing the winding stem using a screwdriver.

Insetting the Spring Click

Procedure for inserting the spring click in automatic calibres.

Balance and Index Assembly

Related product manuals