Swede Electronics EC Buddy User Manual

TECHNICAL SPECIFICATIONS
Type no: ECB-401 ECB-601 ECB-801 ECB-1001
Rated current/voltage
4 A 24 V 6 A 24 V 8 A 24 V 10 A 24 V
Battery voltage/size
24 V, 12 cells
12 to 40 Ah* (C5)
24 V, 12 cells
18 to 60 Ah* (C5)
24 V, 12 cells
25 to 80 Ah* (C5)
24 V, 12 cells
32 to 100 Ah* (C5)
Mains voltage
230 V~ 50 Hz 230 V~ 50 Hz 230 V~ 50 Hz 230 V~ 50 Hz
Max power consumption
200 VA 295 VA 290 VA 600 VA
Mains current (max effect)
0,9 A 1,3 A 1,7 A 2,6 A
Weight
1,3 kg
Measurements (H x W x D)
205 x 179 x 90 mm incl. handle
Casing class
IP44
Insulation class
II (double insulated)
Safety class
Type B
* EC-buddy is capable of charging batteries up to maximum battery size to 80% in less than 8 hours. The
charger can be used for both GEL- and AGM batteries.
EC-buddy features protection for:
- Reversed polarity
- Shortening of cables
- Sparks when connecting to power or battery
- Overheating
The battery charger should not be exposed to direct sun light
The battery charger may not, completely or partly be, lowered into water or covered with snow.
Cables and connectors may only be replaced by the manufacturer or an authorized service workshop.
CE-markings:
The manufacturer hereby assures that the ECB-1001 complies with the following standards:
EN 60601-1, EN 60601-1-2, EN 12184, ISO 7176-14
Manufacturer:
Swede Electronics i Nås AB
Hjärpholn 18
SE-780 53 NÅS, Sweden
Phone: +46 281 30400
Fax: +46 281 30666
www.swedeelec.se
info@swedeelec.se
User manual
for
EC-buddy

Swede Electronics EC Buddy Specifications

General

Brand	Swede Electronics
Model	EC Buddy
Category	Battery Charger
Language	English