This document is the owner's manual for the "JASMINE 4-in-1 Convertible Crib" by Sweetpea Baby. It provides assembly instructions, safety warnings, conversion modes, and care instructions for the crib.
Function Description:
The Jasmine 4-in-1 Convertible Crib is a versatile piece of nursery furniture designed to adapt to a child's growth. It functions as a standard crib and can be converted into a daybed, a toddler bed, and a full-size bed. This multi-functional design allows the crib to be used from infancy through childhood, providing long-term value. The conversion options require additional components (toddler guard rail and full-size bed rails) that are not included with the crib and are sold separately.
Important Technical Specifications:
- Mattress Dimensions: Any mattress used in this crib must be at least 27-1/4 inches (69 cm) by 51-5/8 inches (131 cm).
- Mattress Thickness: The mattress thickness should not exceed 6 inches (15 cm) and have a minimum thickness of 4 inches (10 cm). The dimensions are to be taken from seam to seam or edge to edge where appropriate.
- Child Height Limit: Stop using the crib when the child begins to climb out or reaches a height of 35 inches (89 cm).
- Mattress Support Panel Positions: The mattress support panel has multiple positions:
- Lowest Position: For toddlers (babies who can stand up and walk).
- Midposition: For infants (babies who start to turn and sit up).
- Highest Position: For newborn babies.
- Materials: The manual emphasizes the use of wood and non-toxic finishes specified for children's products.
Usage Features:
- Assembly: Adult assembly is required. The manual provides step-by-step instructions for assembling the crib, including attaching legs, side panels, headboard, stabilizer bar, mattress support panel, and footboard. An Allen Key is provided for assembly, but a Philips Screw Driver is also needed (not included).
- Safety Tips:
- Always read all instructions before assembling and using the product.
- Do not use the product if it is damaged, broken, or if components are missing.
- Small parts may present a choking hazard prior to assembly.
- Do not use power drills or drivers during assembly to avoid overtightening bolts.
- Place parts on a soft surface during assembly to prevent damage.
- Pediatricians recommend placing healthy infants on their back to sleep to reduce the risk of SIDS.
- Regularly check the crib for damaged hardware, loose joints, missing parts, or sharp edges before and after assembly and frequently during use.
- Do not use a water mattress with this crib.
- Strings can cause strangulation; do not place items with strings around a child's neck, suspend strings over a crib, or attach strings to toys. Tighten all fasteners.
- Do not place the crib near a window where cords from blinds or drapes may strangle a child.
- Infants can suffocate on soft bedding; never add a pillow, comforter, padding, or use plastic shipping bags/film as mattress covers.
- Ensure the mattress fits snugly, leaving no more than a 3 cm gap between the mattress and any part of the crib sides.
- When the child can pull to a standing position, set the mattress to the lowest position and remove bumper pads, large toys, or other objects that could serve as steps.
- Ensure the side is in a raised and locked position whenever the child is in the crib (disregard for non-drop side cribs).
- Do not use the crib if you cannot exactly follow the accompanying instructions or for a child who can climb out or is taller than 90 cm.
- Conversion Modes:
- Daybed: To convert to a daybed, remove the footboard. The mattress support panel must be in the lowest position. All hardware should be stored safely. The stabilizer bar must be installed for daybed use.
- Toddler Bed: To convert to a toddler bed, remove the footboard and attach the Toddler Guard Rail (SKU - 692V, sold separately) using the bolts from the footboard removal. The mattress support must be in the lowest position.
- Full-Size Bed: To convert to a full-size bed, disassemble the footboard and headboard. Remove the mattress support panel, followed by the left and right panels. All parts and hardware should be stored safely. Bed Rails (SKU - 849, sold separately) are required for this conversion. The manual specifies using a Bunky Board, Particleboard, or low-profile Boxspring before placing the mattress directly on wooden slats.
- Recommended Mattress: For a safe and comfortable sleep experience, the manual suggests using Dream On Me or Evolur Greenguard Gold Certified Full-Size Mattress.
Maintenance Features:
- Cleaning: Use only water on a damp cloth to clean surfaces. Do not use window cleaner or cleaning abrasive, as it will scratch the surface and could damage the protective coating.
- Wood Furniture Care:
- Room Climate Control: Wood is porous and responds to its environment. Maintain room humidity levels between 35% and 40% and temperatures between 65 and 75 degrees Fahrenheit to prevent shrinking, expanding, and cracking. Avoid placing furniture near air-conditioning outlets, fireplaces, radiators, space heaters, humidifiers, or dehumidifiers.
- Sticking Doors and Drawers: Minor changes in temperature and humidity can cause swelling. Consider using a dehumidifier or rubbing candle wax/paraffin on sticking sides.
- Avoid Direct Sunlight: Ultraviolet rays can fade colors, darken woods, cause crazing or hairline cracks, and yellow white finishes.
- Proper Storage: Do not store furniture in damp basements or hot, dry attics. Ensure air movement around the furniture and avoid stacking.
- General Furniture Care:
- Protect surfaces from hot or extremely cold items using coasters.
- Do not use synthetic fabric under accessories or lamps.
- Protect tops from pens, markers, and crayons.
- Oils from potpourri and other scented items can damage the finish.
- Do not drag items across the surface.
- Rotate accessories and lamps to allow the surface to breathe.
- Do not over-polish (two or three times a year is sufficient) or wax the furniture.
- Always lift the unit when moving furniture to avoid damage to legs.
- Keep the furniture level for proper door and drawer function.
- Clean with a damp, not wet, cloth and mild soap. Avoid abrasive cleaners.
- Do not scratch or chip the finish.
- Inspect the product periodically for replacement parts or questions.
- Do not store the product or parts in extreme temperatures (hot attic, damp/cold basement) to prevent loss of structural integrity.
- Place a doily or felt pad under items to preserve the luster of the finish.
- Clean with a damp cloth, then a dry cloth to preserve luster and beauty.
- Do not use abrasive chemicals or spray cleaners directly onto furniture.
- Lift slightly when moving on carpeting to prevent leg breakage.
- Avoid using vaporizers near furniture, as it can cause wood to swell and peel.
Warranty:
Sweetpea Baby offers a limited warranty covering defects in material and workmanship for 1 year from the date of original purchase, valid upon presentation of proof of purchase. The warranty is limited to the repair or replacement of defective furniture components and does not include assembly labor. It does not cover products improperly assembled, subjected to misuse or abuse, or altered/repaired. The warranty provides specific legal rights, which may vary by state.
Sweetpea Baby
1532 S. Washington Ave STE1
Piscataway, NJ 08854-9908
E-mail: info@sweetpeababy.com
Website: www.sweetpeababy.com/help
Customer care and product registration are available via QR code or website. Social media channels (@Mysweetpeababy on Facebook and Instagram) are also provided for engagement.
Need help?
General
To Next Page
