61
Operation and maintenance instructions
- Conditions:
• The hours limit must be congured with a value greater than 0.
- Causes:
•
The hours limit for the major maintenance has been reached.
The instructions in this manual for the 12 months maintenance should be followed.
Reset the hours for major maintenance aer this operation, this will reset automatically the alarm and give it again aer the
same period. Reset also minor maintenance hours.
Eects:
8.23 TYPE 22: ALARM INDICATING THAT THE HOURS LIMIT FOR THE MAJOR MAINTENANCE
HAS BEEN REACHED
TAC control board
ALARM OUTPUT AL dPa OUTPUT LED ALARM Fans
/ / ON /
Auto reset: via dedicated reset
Displayed on HMI TACtouch
Code Text displayed Level
M.11 MAJOR MAINTENANCE ALARM 1