Swift Compact C404 - Control Panel Start-up and Settings; Initial Start;Stand-by Screen; Selecting Energy Mode; Selecting Setting Level

Page of 6 15
Start-up
Start/Stand-by screen
When the control panel is connected to the
power supply, after a few seconds a start screen
is displayed.
Select setting level
•
Tap the rotary push button (8).
The display shows the setting level. The first icon
flashes.
•
Use the rotary push button (8) to select the
icon in the menu line (3).
•
Tap the button to go to the setting level.
•
Select the desired temperature with the rotary
push button (8).
•
Tap the rotary push button (8) to confirm the
value.
Change room temperature
•
Use the rotary push button to select the icon in
the menu line.
•
Tap the button to go to the setting level.
•
Select the desired energy mode with the rotary
push button.
•
Tap the rotary push button to confirm the
value.
•
Only 2 Options will ever be used (a) GAS €
Ele2
Select energy mode
Change hot water level
•
Use the rotary push button (8) to select the
icon in the menu line (3).
•
Tap the button to go to the setting level.
•
Select the desired hot water level with the
rotary push button (8).
•
Tap the rotary push button (8) to confirm the
value.