Towing Capabilities
14
Model Engine / Chassis MTPLM Permissible Permissible Recommended Gross Train
Front Axle Rear Axle Maximum Weight
Load Load Trailer Weight
Kon-tiki 615 2.8L JTD Ducato 18 / AL-KO Low Frame 3.85T 3850kg 1850kg 2120kg 1650kg 5500kg
Kon-tiki 615 2.8L JTD Ducato 18 / AL-KO Low Frame 4.0T 4000kg 1850kg 2300kg 1500kg 5500kg
Kon-tiki 645 2.8L JTD Ducato 18 / AL-KO Low Frame 4.0T 4000kg 1850kg 2300kg 1500kg 5500kg
Kon-tiki 655 2.8L JTD Ducato 18 / AL-KO Low Frame 4.0T 4000kg 1850kg 2300kg 1500kg 5500kg
Kon-tiki 660 2.8L JTD Ducato 18 / AL-KO Low Frame 3.85T 3850kg 1850kg 2120kg 1650kg 5500kg
Kon-tiki 660 2.8L JTD Ducato 18 / AL-KO Low Frame 4.0T 4000kg 1850kg 2300kg 1500kg 5500kg
Kon-tiki 665 2.8L JTD Ducato 18 / AL-KO Low Frame 3.85T 3850kg 1850kg 2120kg 1650kg 5500kg
Kon-tiki 665 2.8L JTD Ducato 18 / AL-KO Low Frame 4.0T 4000kg 1850kg 2300kg 1500kg 5500kg
Kon-Tiki Towing Capabilities
CAUTION: When fitting a towbar, it must meet certain minimum requirements as specified by Type Approval Regulations. The bar will have marked
on it the approval standard (94/20/EC) and the maximum download, or noseweight, that it can accept. It must fit the manufacturer’s
approved mounting points and must not obscure the towing vehicle’s number plate.
To ensure adequate road holding, the load on the front axle, under all conditions, must not be less than 42% of the total weight.
Care must be taken when distributing loads. The loadings above are maximum loadings and must not be exceeded under any circumstances.
To Next Page
Need help?
General
