1 2
3
4 6
7 8
1 - Power ON/OFF switch
2 - Energy selector button 230V ~
3 - Energy selector button GAS
4 - Energy selector button 12V =
6 - Temperature level selection
7 - Temperature level display
8 - Indicator LED failure / Reset button
GAS FAILURE
Switching ON/OFF
• Switch ON by pressing button (1), 2s
• Switch OFF by pressing button (1), > 2s
230V AC operation
• Select “Mains voltage” by pressing button (2)
• Set temperature step by pressing button (6)
12V DC operation (vehicle’s battery)
• Select “Battery voltage” by pressing
button (4)
• Set temperature step by pressing button (6)
Gas operation
• Select “Gas” by pressing button (3)
• Set temperature step by pressing button (6)
Automatic energy selection /
automatic ignition (RM 8xx5) AES
Fig. 9
1 2 3 4 5 6 8
7
1 - Power ON/OFF switch
2 - Energy selector button 230V ~
3 - Energy selector button GAS
4 - Energy selector button 12V =
5 - Selector button “AUTOMATIC”
6 - Temperature level selection
7 - Temperature level display
8 - Indicator LED failure / Reset button
GAS FAILURE
Switching ON/OFF
• Switch ON by pressing button (1), 2s
• Switch OFF by pressing button (1), > 2s
Manual operation
• Select energy source with buttons (2,3,4)
• Set temperature step by pressing button (6)
Automatic operation
• Change over to “Automatic” with button (5)
Automatical energy selection (if available)
Sequence of priority:
1.) Solar (12V -)
2.) 230V ~
3.) 12V -
4.) Liquid gas
• Set temperature step by pressing button (6)
DOMETIC REFRIGERATOR