Opening
- Push the united end rods until the blind is
fully extended. Press the catch and guide
the blind back to its original position in
the frame. (do not let the blind recoil)
Adjusting (Fig. 3)
Push the united rods until the desired setting
is reached.
Attention: When there is strong sunshine, the
blind should be closed only to 2/3 (the heat
trapped between the blind and the acrylic
dome could damage plastic components).
Safety precautions:
1. Repairs should be carried out only by
trained personnel.
2. Inform an approved dealer in case of
defects and malfunctions.
3. Before starting off, check the rooflight for
damage in the acrylic dome (tension
cracks) and the winding mechanism
which could arise owing to, for example,
branches and other natural causes.
4. Do not step in the acrylic dome.
5. Close the roof light before starting off
(check whether it is locked).
6. Do not leave the vehicle with the rooflight
open (danger of burglary or from rain).
7. Do not open in strong wind or rain.
8. Before opening, remove snow, ice, dirt,
etc. from the acrylic dome.
9. Malfunctions are to be repaired by an
approved dealer at once.
10. Do not use caustic detergents (danger of
tension cracks in the acrylic dome).
Care instructions:
- Please clean the acrylic panes with the
Seitz Acrylic Cleaner.
- Stains and light scratches on the acrylic
pane can be removed by using the Seitz
Acrylic Polish and the Seitz special
polishing cloth.
95
Fig. 1
Fig. 2
Fig. 3
Equipment Details
To Next Page
Loading...
Need help?
General
