To Next Page

To Previous Page

Towing Capabilities

Model Engine / Chassis MTPLM Permissible Permissible Recommended Gross Train

Front Axle Rear Axle Maximum Weight

Load Load Trailer Weight

Kon-tiki 615 2.8L JTD Ducato 18 / AL-KO Low Frame 3.85T 3850kg 1850kg 2120kg 1650kg 5500kg

Kon-tiki 615 2.8L JTD Ducato 18 / AL-KO Low Frame 4.0T 4000kg 1850kg 2300kg 1500kg 5500kg

Kon-tiki 645 2.8L JTD Ducato 18 / AL-KO Low Frame 4.0T 4000kg 1850kg 2300kg 1500kg 5500kg

Kon-tiki 655 2.8L JTD Ducato 18 / AL-KO Low Frame 4.0T 4000kg 1850kg 2300kg 1500kg 5500kg

Kon-tiki 660 2.8L JTD Ducato 18 / AL-KO Low Frame 3.85T 3850kg 1850kg 2120kg 1650kg 5500kg

Kon-tiki 660 2.8L JTD Ducato 18 / AL-KO Low Frame 4.0T 4000kg 1850kg 2300kg 1500kg 5500kg

Kon-tiki 665 2.8L JTD Ducato 18 / AL-KO Low Frame 3.85T 3850kg 1850kg 2120kg 1650kg 5500kg

Kon-tiki 665 2.8L JTD Ducato 18 / AL-KO Low Frame 4.0T 4000kg 1850kg 2300kg 1500kg 5500kg

Kon-Tiki Towing Capabilities

CAUTION: When fitting a towbar, it must meet certain minimum requirements as specified by Type Approval Regulations. The bar will have marked

on it the approval standard (94/20/EC) and the maximum download, or noseweight, that it can accept. It must fit the manufacturer’s

approved mounting points and must not obscure the towing vehicle’s number plate.

To ensure adequate road holding, the load on the front axle, under all conditions, must not be less than 42% of the total weight.

Care must be taken when distributing loads. The loadings above are maximum loadings and must not be exceeded under any circumstances.

Swift sundance User Manual

Questions and Answers: