P a g e | 2
UNDERSTANDING THE REGISTRATION PROCESS
Getting up and running with your SLX product is a two-part process. This is necessary because your SLX
Product integrates with a 3
rd
Party Software, E6 Connect. Because these are two different companies,
the setup process will involve creating and account and registering with both companies.
The first part of the process is to register your purchase with Swing Logic for warranty coverage, and to
be issued a License Key needed for E6. The second part of the process is setting up your account with
E6, downloading E6 Connect, redeeming the license key from part one, and then activating/binding the
License on your iOS device or PC.
Two Part Process Explained:
PART 1 (Swing Logic):
• Register your device with Swinglogic.us
• Select either iOS or PC, for the system you intend to use E6 Connect with
o One License included for a single system.
o Additional purchase required for a license with a second system (e.g. iOS AND PC)
• Receive a Product Key needed to activate E6 SLX & Tittle 5-course License
o Available on SwingLogic Website
o Also emailed from registration@swinglogic.us
PART 2 (E6 – Owned by TruGolf):
• Download E6 Connect
• Create account with E6
• Activate account with E6 by clicking a link sent from noreply@e6golf.com
o Often found in SPAM/JUNK
• Redeem your Product Key provided in part 1.
• UNBIND demo license that was auto assigned set up automatically by E6
• BIND the 5-course SLX & Tittle subscription activated when the Product Key is redeemed.
To Next Page
Loading...