To Next PageTo Next Page
Need help?Do you have a question about the Swiss SensorMaster II and is the answer not in the manual?
Battery| battery type | 3V lithium battery (CR2032) |
|---|---|
| battery life | 1.5 years |
| battery low detection voltage | 2.4 V +/- 0.2 |
Thermometer Specifications| temperature resolution | 0.1 °C or 0.18 °F |
|---|---|
| temperature measuring range | -10.0 °C to 60.0 °C or 14.0 °F to 140.0 °F |
| sampling interval | 1 second for first 3 minutes, then 1 minute |
Barometer Specifications| pressure resolution | 0.1 hPa/mbar or 0.01 inHg |
|---|---|
| pressure measuring range | 300.0 hPa/mbar to 1100.0 hPa/mbar or 8.84 inHg to 32.44 inHg |
| pressure tendency resolution | 0.01 hPa/mbar |
Altimeter Specifications| altitude resolution | 1m or 3.28ft |
|---|---|
| altitude measuring range | -702m to 9164m or -2306ft to 30065ft |
| altitude display range | -9164m to 9164m or -30065ft to 30065ft |
Functionality for time, date, alarms, and stopwatch.
Features for altitude measurement and tracking.
Features for barometric pressure measurement and trends.
Procedure for setting the watch's current time and date.
Procedure for setting the secondary time zone.
How to set and manage daily and date-specific alarms.
Detailed steps for configuring the daily alarm.
Detailed steps for configuring the date-specific alarm.
How to start, stop, and reset the chronograph timer.
How to record lap times during chronograph use.
How to view and clear recorded lap memory.
Setting up the countdown timer with quick set values.
Setting up the repeater timer for continuous counting.
Why and when to calibrate the altimeter for accuracy.
Step-by-step guide to calibrating the altimeter.
Details on the two independent altitude alarms.
How to set the alarm thresholds and enable/disable alarms.
Why and when to calibrate the barometer for accuracy.
Step-by-step guide to calibrating the barometer.
How the watch indicates a low battery and its meaning.
Guidance on replacing the battery by a certified agency.
