8
Insert the separate Hook into the curtain rail and rotate it by 90°. Pull the Hook towards
one side of the rail and tilt it back and forth to double check it fits inside the rail
perfectly. If you have tried all the Hook Wheels provides and none of them works as
expected, please contact our customer support at support@wondertechlabs.com.
Insert both of the Curtain's Main Body (with one Hook attached) and the separate Hook
into the curtain rail simultaneously, rotate them by 90°, and instantly attach the
separate Hook back to the Main Body. The SwitchBot LOGO should face your room.
To Next Page
Loading...
