If you've run into problems when attaching
your Keypad Touch to the mounting plate,
please refer to the following solutions to solve
the problem:
OCheck if the battery cover is properly
clicked into place. The battery cover should
cover the battery box perfectly and form a
flat surface with its surrounding case parts.
Then try attaching your Keypad Touch to the
mounting plate again.
@Check if the installation surface is uneven.
An uneven surface may cause the mounting
plate to be too closely mounted to the wall.
If so, you may need to place two rubber rings
at the screw holes at the back of the mounting
plate to ensure there is a certain distance
between the mounting plate and the wall
surface.
13
To Next Page
Loading...
