If you've run into problems when attaching
your Keypad to the mounting plate, please
refer to the following solutions to solve the
problem:
OCheck if the battery cover is properly
clicked into place. The battery cover should
cover the battery box perfectly and form a
flat surface with its surrounding case parts.
Then try attaching your Keypad to the
mounting plate again.
@Check if the installation surface is uneven.
An uneven surface may cause the mounting
plate to be too closely mounted to the wall.
If so, you may need to place two rubber rings
at the screw holes at the back of the
mounting plate to ensure there is a certain
distance between the mounting plate and
the wall surface.
13
To Next Page
Loading...
